Pan India Supply  |  Export to Saudi Arabia, Nepal, UAE

A Well-Stocked Alternative in India's Tipper Segment

Refurbished Bosch Rexroth Tipper & Dumper Hydraulic Pumps

The Bosch Rexroth AZPF external gear pump — rated to 250 bar across a wide displacement range — is a globally available, widely serviced alternative for PTO-driven tipper bodies. Where a Sauer Danfoss PV-series piston pump might be overkill and an Eaton gear pump doesn't quite match your body size, Rexroth's AZPF fills the middle ground. PumpGrid supplies tested refurbished units for Tata, Ashok Leyland, and Bharat Benz tipper trucks.

AZPF Series to 250 Bar Widely Available Ex-Stock 3-Month Warranty Pan India Supply

India's tipper truck market runs on PTO-driven hydraulic pumps that tip the body — and no single brand dominates the aftermarket. Rexroth's AZPF is a fixed-displacement external gear pump available across sizes from 4 to 28 cc/rev, rated up to 250 bar, and stocked widely through India's industrial hydraulics distribution network. That availability is exactly why it's a practical choice when your original pump — whatever brand — needs fast replacement.

Choosing the Right Gear Pump for Your Tipper

Tipper Body SizeAZPF DisplacementPressureComparable To
8-12 cubic metre11-16 cc/revUp to 250 barEaton 4623 class
12-16 cubic metre19-22 cc/revUp to 250 barEaton 5421 class
16-20 cubic metre25-28 cc/revUp to 250 barEntry-level piston pump range

Displacement needed depends on cylinder bore, stroke, and desired tip time — confirm your exact requirement via WhatsApp before ordering. For bodies above 20 cubic metres, a piston pump (see our Sauer Danfoss Tipper Pump page) is usually the better fit.

Refurbished Bosch Rexroth AZPF External Gear Pump for Tipper Truck
Bosch Rexroth AZPF external gear pump — refurbished, pressure tested to 250 bar

What Our AZPF Refurbishment Covers

Gear Wheel Pair

Measured against Rexroth tolerance and replaced if worn — the primary source of reduced flow output.

Front & Rear Cover Housing

Checked for scoring on the wear faces that control internal leakage as pressure builds.

Shaft Seal & All O-rings

Replaced as standard — the most common leak point on a PTO-driven tipper pump.

Pressure Test at Rated Bar

Verified up to 250 bar with output documented on the written test report.

Why Fleet Owners Choose Refurbished Rexroth Pumps

A Grounded Vehicle Earns Nothing

A tipper truck with a failed pump is a truck sitting idle. PumpGrid's 2-3 day dispatch gets it back tipping loads instead of parked at the yard.

Cost-Effective Against a High-Cycle Job

A tipper pump cycles thousands of times a year. A refurbished AZPF unit at 40-60% below new pricing keeps your per-trip economics sound.

Fleet Pricing for Multi-Truck Operators

Transport and mining contractors running several tippers get volume pricing and stock reservation on repeat orders.

3-Month Warranty, Confirmed in Writing

If the pump fails due to a refurbishment defect within warranty, we replace it — not repair it.

Tipper Pump Warning Signs

Body lifting slowly or stalling partway up
Whining or rattling noise when PTO engages
Hydraulic oil overheating on repeated tips
Oil leak around the PTO/pump coupling
Body tips fine empty but struggles under full load
Longer tip time than when the truck was new

If 2 or more of the above apply, WhatsApp us your truck model and body size — we'll confirm the correct pump.

We Supply Across India

FAQs

My tipper currently has a different brand pump — can I switch to a Rexroth AZPF?
In most cases yes, provided the PTO mounting flange, spline, and displacement rating match your truck's requirement. WhatsApp your truck model and current pump's part number (or a nameplate photo), and we'll confirm compatibility before quoting.
How do I know if my tipper needs a gear pump or a piston pump?
As a general guide, tipper bodies up to around 16-18 cubic metres run well on a gear pump like the AZPF. Larger bodies, or trucks tipping very heavy loads at higher frequency, typically need a piston pump for the higher pressure and durability margin. If you're not sure, tell us your body size and typical load and we'll advise.
Can you supply for a fleet maintenance contract with regular replacements?
Yes. We work with transport and mining contractors managing tipper fleets who need recurring pump replacements — stock reservation and invoice-basis billing available for repeat accounts.

Related Pages

Get Rexroth Tipper Pump Quote

Tell us truck model and body size — reply within 2 hours.

Your details are private.

Received! WhatsApp reply within 2 hours.
WhatsApp for Fast Quote